<p>Product information:</p> <p>Model: AB056</p> <p>G.W:106 G</p> <p>Packing Size:9*7*12.2cm</p> <p>Product name: Milk bottle insulation cover</p> <p>Product size: Diameter of 50-80mm*120mm</p> <p>Rated voltage: 5V</p> <p>Rated current: 2A</p> <p>Rated input power: 10W</p> <p>Suitable feeding bottle diameter: 50mm-80mm</p> <p>Main materials: PU, polyester fiber, PET, alloy heating film</p> <p>Component details:</p> <p>Handle, insulation cover, temperature control button, temperature value display screen, Type-C interface</p> <p>Operations:</p> <p>1.1.Put the bottle into the insulation cover adjust the magic tape according to the size of the bottle, and connect the power supply.</p> <p>2.After connecting the power supply, the power light is on and the connection is normal. The default temperature is 35 ℃.</p> <p>3.Long press the + button to start the temperature adjustment, a total of 7 gears can be adjusted (35°C, 40°C, 45°C, 50°C, 55°C, 60°C, 65°C)</p> <p>4. After selecting the gear, the display will jump to the current temperature and start working.</p> <p>5. After the preset temperature is reached, the temperature display shows the preset temperature and enters the insulation mode.</p> <p>Kind tips：</p> <p>1. When the temperature is lower than the set temperature, and is heated, the value display will change according to the current temperature.</p> <p>2. When the temperature reaches the set temperature, it stops heating, and enters the heat preservation state, and the display shows the set heat preservation temperature.</p> <p>3.When the temperature is higher than the set temperature, the display shows the real-time monitoring temperature.</p> <p>4.It is recommended to use this product in the environment of 0℃~40℃. Lower the environment temperature is, longer the heating-up time will be.</p> <p>5.The heating function at low temperature is limited by the power and cannot be achieved at present.</p> <p>6.Heating of 200ml of water from 25℃ to 45℃ takes about 20 to 30 minutes.</p> <p>7.The heating time is long, it is recommended to heat in advance and keep it warm.</p> <p>8.The minimum diameter of the bottle shall not be less than 50mm, and the maximum diameter shall not be greater than 80mm.</p>