7 Sizes Available -- 20mm/24mm/28mm/38mm/58mm/63mm/70mm,thickness is 1mm. Multiple sizes can meet your different size bottle closures without additional cropped.
Keep Fresh -- Pressure Sensitive Seals are a quick and easy way to and preserving them longer that ship well and don't leak with texture of products by providing an airtight seal that is tight, leak-proof, pressure-proof, water proof.
Easy to Apply -- No fancy equipment needed. Just place them in the lid non-character side up then tighten lid, and let sit for 4 to 5 hours and it's sealed.
Reliable Material -- Our pressure seals are coated with a torque-activated adhesive for a self-adhesive seal and can be tightly sealed. It may stick together during transportation, but it does not affect the use, just separate them when using.
Suitable for Most Bottles -- These safety seals are suitable for different containers such as common mouth cans, jugs, jars, jars or other round neck containers, and materials from glass to plastic.
Product Description These polystyrene botlle and jar foam liner seals coated with torque-activated adhesive require no tools and no heat induction equipment. Size Liner 1: about 20x1mm, 100pcs; Liner 2: about 24x1mm, 100pcs; Liner 3: about 28x1mm, 100pcs; Liner 4: about 38x1mm, 100pcs; Liner 5: about 58x1mm, 100pcs; Liner 6: about 63x1mm, 100pcs; Liner 7: about 70x1mm, 100pcs. Product features: simple operation, easy to use, good sealing performance 1. Prevent leakage 2. Product anti-theft 3. Product anti-counterfeiting 4. Product anti-tampering 5. Keep fresh 6. Extend the shelf life of products 7. Easy to transport Scope of application: 1. Used in glass bottles, metal bottles, plastic bottles (the effect is better for solid dry food or medicine inside the bottle); 2. Bottle sealing of dry solids, capsules, dry powder, particles and other products; 3. Cosmetics, daily chemical products, medicine, food, beverage; 4. Wine, pesticide, oil, chemical and other plastic containers and glass bottle seal special; 5. Plastic bottles (PE PET PP PS) glass bottles metal bottles and hoses; 6. It is not recommended to seal corrosive and volatile liquid products. For proper application consider the following recommendations: 1.Make sure your pressure sensitive liner size matches the bottle or jar opening. 20mm/24mm/28mm/38mm/58mm/63mm/70mm,thickness is 1mm. Multiple sizes can meet your different size bottle closures without additional cropped. 2.Completely clean the jar top with clean cloth and alcohol to clear of liquid and/or solids. 3.Screw metal or plastic cap on bottle. Make sure the liner and cap are tightly securedon the container. 4.Once the cap is applied, it should not be removed for at least 4 hours to ensure proper adhesion. Although depending on your application, the adhesionprocess might take significantly less time. 5.Seals can be used with glass and plastic bottles or jars and with lined or unlined caps.These pressure sensitive liners are best for use with powder or dry products. 6.Avoid overfilling your containers! 7.Once seal is removed, it cannot be reapplied.